Homegroup Cannot Be Set Up in Windows 10, 8.1 and 7

Networking is a critical part that connects to any computer, especially if you want to share files and collaborate with other users. This is extremely important if you work in a small business or if you want to share files between two computers. To do this, you must first package a home group, but ten Windows users report an error that could indicate that the home group cannot be configured to ascend on this computer.

Fix original group problems in Windows 10

The Homegroup function is a useful feature that allows you to easily share files within a PC in the same communication, but many users have reported that these products are not able to create another original group in Windows 10. Speaking of home group problems, here are some of the most common problems that users have had with home group problems:

  • Impossible to connect to – Sometimes it is not possible to connect a homegroup to your new computer. This can be a big scenario, but you could fix it by turning off more or less all PCs and setting up a current home group.
  • (H omegroup only subscribe – If you encounter these difficulties, make sure to remove the content from the peer network directory and try – create your personal group again.
  • I simply cannot create, connect or use one H omegroup – This is another problem with the homegroup that you can see. In this case, make sure that the necessary home group services are enabled.
  • Homegroup cannot be created, recognized, deleted on this private computer – There are so many problems with homegroups that can be displayed on your PC, but if individuals have one of these problems, you can solve them with one of our products.
  • Homegroup cannot access other computers, see Multiple Computers – If you can’t imagine other computers in your homegroup, you may need to change the Security Read Write for MachineKeys and PeerNetworking sites.
  • (W

    does not work – This is a common problem that often occurs in home and business groups to fix it, make sure IPv6 is enabled.

Solution 2 – Delete files outside the PeerNetworking folder

      1. Go to C:WindowsServiceProfileLocalServiceAppDataRoamingPeerNetworking .
      2. Delete idstore.sst and/or continue Step 3. If the deletion of idstore.sst does not contain any services, return to C:WindowsServiceProfilesLocalServiceServiceAppDataRoamingPeerNetworking and only delete files and folders in and also to Step 3. 17)
      3. Go to Network Social Network Settings and Leaving Homegroup .
      4. Repeat the operation for all computers on the respective network.
      5. Disable your privacy.
      6. Light only one and create each new home group on it.
      7. The HomeGroup element must now be detected on all associated computers.

            Solution 2 – Activate, make sure you receive peer network aggregation services

            Sometimes, the services needed to work with the home group will be disabled for other reasons, but there is a way to help you activate them.

            1. In this Search, type services.msc and simply click Enter or OK.
            2. Search a list for Peer Network Collection, Peer Network Identity Manager, Homegroup Listener, or Homegroup Provider.
            3. If these services could be disabled or set to manual, they were switched to Automatic and left the best home group.
            4. Create a new home group and see if it works.

            We should already mention that you need to do this right for many computers in your network.

            Solution 3 – Allow full control of the MachineKeys and PeerNetworking folders

          • Search :
            • C:Program dataMicrosoftCryptoRSAMachineKeys
          • And find it now:
            • C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking
          • Right click on each folder and select Properties.
          • Go to Security Expenses. You see a group of end users, click on a group and Modify .
          • In the list of options, click on Total control .
          • Repeat the operation for anyone who wants users to access a home group.

    We determine that you may need to address this issue for all your employees on a network.

    Homegroup can generally not be configured on this computer is now a boring Windows 10 error, in addition, if none of these solutions is useful, you may want to perform a reinstallation as a last resort.

    Solution four . – Rename the MachineKeys directory

    If you could not configure a home group directly under Windows 10, the problem may be related to the MachineKeys folder. However, you may be able to solve the problem by simply renaming the MachineKeys directory. To do this often, simply follow these steps:

    1. Navigate to the directory C:ProgramDataMicrosoftCryptoRSA .
    2. Now position MachineKeys, right-click and select Rename from the menu.
    3. Change the appointment from MachineKeys to Old MachineKeys .
    4. Now create a new folder called MachineKeys and even give full control rights to each user of your incredible PC. To find out how to do this with a majority of them, you should consult the early solution for more information.

    After recreating the MachineKeys directory, the condition must be completely resolved and you can configure the new origin group again. Many users have indicated that this solution works for individuals, so try this item.

    Solution 5 – Turn off all PCs and create a new appropriate home group

    If you are unable to configure a home group on Windows 10, the problem could be all other PCs. Other PCs from your supplier may sometimes interfere and conflict with the home group. However, your company can solve the problem simply by doing the following.

    1. First, ban all services that start with Home and also Peer on all computers.
    2. Continue with C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking and delete all content from this folder. Perform this approach on all your operator’s PCs.
    3. Now turn off all but one computer on your network. Make sure, of course, that the PCs are completely out of order. If necessary, unplug the power cord from the power outlet for safety.
    4. Now you should only have one PC running. Restart the HomeGroup Provider service on this laptop or desktop computer in general.
    5. Now create a new home group on such a PC.
    6. Restart all computers on your company’s network and join the newly formed home group.

    This solution may be a little complicated, but several people have reported that it works, so you should try it.

    Solution 6 – In particular, make sure your clock is working properly

    If you can’t set up some kind of house group on your PC, the problems could be your clock. Several people reported that their watch was incorrect, which caused the problem due to the home group. If you are simply setting up a home group on your computer, be sure to check that the time is correct. To set the time on your PC, proceed as follows:

    1. Right-click with the clock in the right corner of the taskbar. Select Set the date/time directly from the menu.
    2. Deactivate the checkbox Automatically set the precious time and increase it after a few seconds. This actually sets your time automatically. In addition to clicking the Change button , you will probably disable this function to manually select the time if you prefer.

    This is a rare solution, but many users have reported that those who seem to be setting their clock have solved the difficult task for them, so be sure to try it.

    More efficient solution – Check home group password

    Many Windows Ten users reported that they could not join a home group because they did not even have the required password. It is often a boring problem, but it is undoubtedly a way to solve it. To solve this problem, proceed as follows:

    1. Open the Application Settings Smartphone. You can do this quickly by simply pressing Windows Key + i’ve.
    2. When the application Settings opens, navigate to Network and Internet .
    3. select Ethernet from the rendered image menu and select HomeGroup from the fantasy window.

    After that, a person should be able to see the password of your home group and use it to connect all other PCs. Note that this program only works if you have already configured a home group on your favorite PC.

    Solution 1 – Make sure IPv6 is enabled on all PCs

    If you cannot configure the new home group, the current problem may be the IPv6 function. Depending on the user, this may result in the deactivation of some programs and these problems may occur. However, you can solve the problem completely by helping IPv6. To do this, simply follow the following steps:

    1. Click on the Network button in the lower right corner to select your network from the menu.
    2. Now select Change adapter alternative options .
    3. Right-click on your network connection and select Properties from the menu.
    4. Locate Internet Protocol Version 6 eight (TCP/IPv6) and make sure it is turned on. Now click on OK to save the corrections.
    5. Repeat these steps for which PC on your network.

    Having made IPv6 possible for all PCs, most people should be able to configure the home group without any problems.

    Solution 7 – Change computer status

    If you have problems with the home group on your PC, you can solve them by simply renaming the names of the PCs involved. Changing the computer name should solve several configuration problems you are experiencing about grouping personal computers. To improve the name of your computer, do the following:

    1. Press ms Window + S button and enter handle. Select Display the name of your PC from this list of special results.
    2. Now click on the button Rename this PC .
    3. Enter the new computer name and click Next .
    4. After changing the name often, restart your PC to start making changes.

    Remember that many of you need to reiterate this commitment for all of the company’s computers that are affected by this issue. After that, you should be able to connect to the home group without any problems.

    We also recommend that you download this tool (100% intact and tested by us) to really solve various PC problems such as file loss, malware and hardware errors.


    If you have other problems with Windows 10, you can look for a solution in our Windows ten Fix section.

Leave a Reply

Your email address will not be published. Required fields are marked *